Installation instructions for Plone for various operating systems and situations.
- Download Plone
- Plone installation requirements
- How to install Plone
- Ubuntu / Debian
- Installing Plone using the Unified UNIX Installer
- Installing Plone using buildout on Ubuntu / Debian
- Installing Plone using RPMs, .dev, ... packages
- Microsoft Windows
- Ubuntu / Debian
- Entering debug mode after installation
- Installer source code
This document covers the basics of installing Plone on popular operating systems. It will also point you to other documents for more complex or demanding installations.
Plone runs as an application on the Zope application server. That server is installed automatically by the install process.
We strongly advise against installing Plone via OS package or port. There is no .rpm, .deb, or BSD port that is supported by the Plone community. Plone dependencies can and should be installed via package or port -- but not Plone itself.
Plone is available for Microsoft Windows, Mac OSX X, Linux and BSD operating systems.
Binary installers are available for Windows and OS X. Installation on Linux, BSD and other Unix workalikes requires a source code installation, made easy by our Unified Installer. "Unified" refers to its ability to install on most Unix workalikes.
See Plone installation requirements for detailed requirements.
- You need at a dedicated or virtual private server (VPS) with 512 MB RAM available. Shared hosting is not supported unless the shared hosting company says Plone is good to go. See Plone installation requirements.
- If you are installing for production - rather than testing or evaluation - review Deploying and installing Plone in production before installation.
Plone can run on all popular desktop or server operating systems, including Linux, OS X, BSD and Microsoft Windows.
- You can install Plone on a server for production usage
- You can install Plone locally on your own computer for development and test drive
We describe Ubuntu/Debian installation in detail as an example of installation on a common Unix workalike. The only difference for most other systems would be in package-manager commands and package names. See Plone installation requirements for package names and commands on other platforms.
This is the recommended method for a development or evaluation installation of Plone on a Unix workalike. For a production installation, Installing Plone for Production on Ubuntu is a much better guide.
This recipe is good for:
- Plone development and testing on Ubuntu / Debian
- Operating system installations where you have administrator (root) access. Note that root access is not strictly necessary as long as you have required software installed beforehand on the server, but this tutorial assumes you need to install the software yourself and you are the admin. If you don't have the ability to install system libraries, you'll need to get your sysadmin to do it for you. The libraries required are in common use.
The resulting installation is self-contained, does not touch system files, and is safe to play with (no root/sudoing is needed).
If you are not familiar with UNIX operating system command line you might want to study this Linux shell tutorial first.
For information on using this installation with more advanced production hosting environments and deployments, see the deployment guide.
Instructions are tested for the Ubuntu 12.04 Long Term Support release.
sudo apt-get install build-essential python2.4-dev python-lxml python-elementtree python-imaging libreadline5 libreadline5-dev zlib1g zlib1g-dev libjpeg62 libjpeg62-dev libssl0.9.8 libssl-dev build-essential subversion cron groff-base wget lynx
You will probably also want these optional system packages (see Plone manual for more information):
sudo apt-get install wv poppler-utils
libreadline-dev is only necessary if you wish to build your own python rather than use your system's python 2.7.
If you're planning on developing with Plone, install git version control support:
sudo apt-get install git subversion
If sudo command is not recognized or does not work you don't have administrator rights to Ubuntu / Debian operating system. Please contact your server vendor or consult the operating system support forum.
For Ubuntu 14.04 please also install libz-dev
Download from the plone.org download page to your server using wget command. Curl also works. Substitute the latest version number for 3.3.6 in the instructions below.
wget --no-check-certificate https://launchpad.net/plone/3.3/3.3.6/+download/Plone-3.3.6-UnifiedInstaller-20110816.tgz
# Extract the downloaded file # tar -xf Plone-3.3.6-UnifiedInstaller.tgz # # Go the folder containing installer script # cd Plone-3.3.6-UnifiedInstaller # # Run script ./install.sh standalone
install.sh has many options, use:
to discover them.
The default admin credentials will be printed to the console. You can change this password after logging in to the Zope Management Interface.
The password is also written down in the
buildout.cfg file, but this
setting is not effective after Plone has been started for the first time.
Changing this setting does not do any good.
If you're using this Plone install for development, add the common development tool set.
cd ~/Plone/zinstance bin/buildout -c develop.cfg
You'll need to add the "-c develop.cfg" again each time you run buildout, or you'll lose the extra development tools.
If you're developing, start Plone in foreground mode for a test run (you'll see potential errors in the console):
cd ~/Plone/zinstance bin/plonectl fg
When you start Plone in the foreground, it runs in debug mode, which is much slower than production mode since it reloads templates for every request.
For evaluation, instead use:
cd ~/Plone/zinstance bin/plonectl start
cd ~/Plone/zinstance bin/plonectl stop
to stop the instance.
By default, Plone will listen to port 8080 on available network interfaces. That may be changed by editing buildout.cfg and re-running buildout.
Now take a look at your Plone site by visiting the following address in your webbrowser:
The greeting page will let you create a new site.
For this you need the login credentials printed to your terminal earlier, also available at
If everything is OK, press
CTRL-C in the terminal to stop Plone if you're running in debug mode. Use the
plonectl stop command if you didn't start in debug mode.
If you have problems, please see the help guidelines.
For automatic start-up when your server boots up, init scripts, etc. please see the deployment guide.
Here are quick instructions to install Plone using a pre-installed buildout and the OS-provided Python interpreter. This procedure is only useful if you know buildout well enough to tailor your own buildout configuration.
You need to manage dependencies (
- create a default
buildout.cfgconfiguration file and folder structure around it;
- automatically download and install all packages from pypi.python.org;
- configure Plone and Zope for you.
virtualenvfor python (on Ubuntu):
sudo apt-get install python-virtualenv
virtualenvwhere you can install some Python packages (
In this virtualenv install
ZopeSkel(from the release 2 series):
source plone-virtualenv/bin/activate easy_install "ZopeSkel"
Create Plone buildout project using ZopeSkel:
paster create -t plone3_buildout myplonefolder
buildout.cfgat this point. Run buildout (use Python 2.4 for Plone 3):
python2.4 bootstrap.py bin/buildout
This is the recommended method if you want to try Plone for the first time.
Please use the installer from the download page http://plone.org/products/plone/releases.
The binary installer is intended to provide an environment suitable for testing, evaluating, and developing theme and add-on packages. It will not give you the ability to add or develop components that require a C compiler. This is very rarely needed.
Installation via the Unified Installer or buildout is very similar to Unix. However, you will need to install a command-line build environment. To get a free build kit from Apple, do one of the following:
- Download gcc and command-line tools from https://developer.apple.com/downloads/. This will require an Apple developer id.
- Install Xcode from the App Store. After installation, visit the Xcode app's preference panel to download the command-line tools.
After either of these steps, you immediately should be able to install Plone using the Unified Installer.
Proceed as with Linux.
When you have Plone installed and want to start development you need do enter debug mode.